BEM Orion Ultra Slim - the new generation reverse osmosis system

Reverse osmosis membrane (RO) for the BEM Orion water filter Central filter element of the system for the deep treatment of tap water and to ensure consistently high drinking water quality. Functions and benefits: Significantly reduces the content of dissolved substances (TDS) Reduces the concentration of heavy metals (including lead) Reduces hardness constituents (salts) in the water Removes unwanted dissolved compounds Ensures stable and consistent water quality Filtration technology: The filter is based on reverse osmosis technology: Water is forced under pressure through a semi-permeable membrane, effectively separating purified water from dissolved substances and impurities. Performance and service life: Recommended replacement: every 12-24 months Under optimum operating conditions: up to 36 months ! The actual service life depends on the quality of the tap water, the mineral content, the pressure and the intensity of use. With an average degree of mineralization of the tap water (approx. 250-300 ppm), it is recommended to adhere to the usual replacement intervals. Instructions for use: Before first use, the filter should be rinsed according to the instructions. Timely replacement is necessary to ensure filter performance and constant water quality. Filter change: The filter can be changed without tools and requires no special expertise. Recommended: Shut off the water supply Depressurize the system Disconnect the appliance from the power supply Replace the filter After installation, the system should be flushed until the water quality has stabilized. Recommendations for filter replacement according to TDS value: TDS value (ppm) Water quality 1st stage (PCB) 2-3rd stage (RO) 0-150 Soft 12 months 24-36 months 150-300 medium hard 8-10 months 12-24 months 300-500 hard 6-8 months 12-18 months 500+ very hard 3-6 months 8-12 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. Important notes: The filter must not be removed during operation. Failure to observe the recommendations may result in reduced filter performance or malfunctions. Damage caused by improper use or failure to observe the operating conditions may be excluded from the warranty. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Composite pre-filter (PCB) for BEM Orion Multi-stage filter for the pre-treatment of tap water and to protect the reverse osmosis system. Combines mechanical filtration with activated carbon for effective water treatment upstream of the RO membrane. Functions and benefits: Reduces mechanical impurities (sand, rust, suspended solids) Reduces the residual chlorine content Improves the taste and odor of the water Relieves the RO membranes and extends their service life Filter structure: The filter is designed as a composite cartridge and consists of a layer of polypropylene fibers (PP) for mechanical filtration an activated carbon block for the adsorption of chlorine and organic compounds Performance and service life: Filter capacity: up to 2400 liters Recommended replacement: every 6-12 months The specified values are guide values and apply under optimum conditions. The actual service life depends on the quality of the tap water, the mineral content, the contamination load and the frequency of use. With an average degree of mineralization of the tap water (approx. 250-300 ppm), it is recommended to adhere to the usual replacement intervals Instructions for use: Before first use, the filter should be rinsed according to the instructions. Regular replacement is necessary to ensure the performance of the system and a consistently high water quality. Filter change: The filter can be changed without tools and in just a few steps. Recommended: Shut off the water supply Depressurize the system Disconnect the appliance from the power supply Replace the filter After installation, the system should be flushed until the water quality has stabilized. Recommendations for filter replacement according to TDS value: TDS value (ppm) Water quality 1st stage (PCB) 2-3rd stage (RO) 0-150 Soft 12 months 24-36 months 150-300 medium hard 8-10 months 12-24 months 300-500 hard 6-8 months 12-18 months 500+ very hard 3-6 months 8-12 months The specified lifetimes are approximate values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters may be shortened even with a relatively low usage volume. Important notes The filter must not be removed during operation. Failure to comply with the recommended replacement intervals can lead to reduced filter performance or malfunctions. Damage caused by improper use or disregard of the instructions may be excluded from the warranty. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de