BEM Orion Ultra Slim - the new generation reverse osmosis system Modern, tankless water treatment system for consistently high drinking water quality straight from the tap. Water treatment takes place in real time during use - without storage, without stagnation and without loss of freshness. The ultra-flat design enables space-saving installation even where space under the kitchen sink is limited. Technology you can feel in your everyday life: Tankless system - freshness without compromise → The water is filtered directly on demand. → The absence of a storage tank reduces the risk of secondary impurities and preserves the natural taste of the water. Two-stage RO filtration (2 membranes instead of 1) → In contrast to conventional systems, two RO membranes are used in series. This enables:     ⇒ particularly thorough water treatment     ⇒ consistently high water quality over the entire service life     ⇒ an extended service life of the system Deep filtration at molecular level → The system combines multi-stage pre-filtration with reverse osmosis and enables water treatment at the highest level. This results in:     ⇒ dissolved substances (TDS) are significantly reduced     ⇒ Heavy metals are effectively removed     ⇒ Chlorine and undesirable compounds are reduced     ⇒ Improves the taste and clarity of the water The result: reliably treated water for everyday use and food preparation. High performance → Up to 1.5 liters of purified water per minute - without waiting time and without intermediate storage. Reliability in detail → The housing is made of corrosion-resistant stainless steel and is designed for use in damp environments under the sink. → The construction ensures long-lasting and stable operation. Intelligent control → Display of filter status and water quality enables timely maintenance and ensures system efficiency. Convenience in daily use → Low noise level → Automatic filter rinsing → Integrated leakage protection → tool-free filter change Filter & service life: The system uses: → pre-filter (PCB) → two RO membranes Filter performance: → Pre-filter: up to 2400 liters → RO membranes: up to 7200 liters These values are guide values and apply under optimum operating conditions. The actual service life depends on the water quality, mineral content, pressure and usage behavior. Recommended replacement intervals: → Pre-filter: every 6-12 months → RO membranes: every 12-24 months → Under optimum conditions: up to 36 months With a tap water value of approx. 250-300 ppm, we recommend using the average change intervals as a guide. Delayed filter changes can reduce the cleaning performance and affect the service life of the system. Technical data System type: Reverse osmosis (tankless) Capacity: up to 1.5 l/min Dimensions (D × W × H): 44.4 × 10.5 × 41.4 cm Installation: under the kitchen sink Voltage: 100-240 V Power consumption: 80 W The intelligent alternative to bottled water: BEM Orion Ultra Slim stands for: consistently high water quality in everyday life No need to store and buy bottled water Compact, modern solution for the kitchen Recommendation: To increase reliability and extend the system’s service life, we recommend installing a sediment pre-filter (M6 PP, Part No. 70200251) at the water inlet. The filter is installed between the faucet and the unit and traps mechanical contaminants such as sand, rust, and sediment, preventing them from entering the system. Regular use and timely replacement of the pre-filter: reduce the risk of clogging internal valves and connections reduce the strain on the pump and other components of the unit help prevent malfunctions in the system contribute to a more stable water supply reduce the likelihood of premature wear on internal components When properly maintained, this helps prevent typical problems associated with system contamination and ensures longer and more reliable use of the device. Please note: You can findsuitable replacement filters for BEM Orion Ultra Slim here: Replacement filter PCB or Replacement filter RO SCOPE OF DELIVERY: After receiving and unpacking the product, you will find two main components. The first component is the water filter itself(RO filterfor 1st and 2nd stage as well as PCB filter incl.) + tap with TDS sensor. The second component is an accessory set for installing the water filter, with the following components: 3-way ball valve 3/8" x 1/4" - For integrating the filter into the drinking water pipe and for shutting off the water supply Power supply unit / power supply unit - External power supply unit for supplying power to the filter system Wall brackets for power supply unit (mounting bracket) - Metal bracket for securely fastening the power supply unit to the wall Fixing material for power supply unit brackets - Dowels and screws for wall mounting the power supply unit brackets Reducing adapter / transition piece 3/8" x 1/4" - Connection adapter for connecting different thread sizes PTFE sealing tape (Teflon tape) - For sealing threaded connections Hose securing clips for plug connectors (1/4") - Fixing clips for securing hose connections PE water hose 1/4", food-safe (5 m) - Polyethylene hose suitable for drinking water for supply or waste water Waste water pipe clamp / waste water clamp (complete) - For attaching the waste water hose to the drain pipe Operating instructions GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

BEM Unicora 2.0 - Direct connection reverse osmosis water filter of the new generation Probably the most compact and intelligent solution in its class of reverse osmosis systems. The BEM Unicora 2.0 is the only system on the German market to combine modern design with maximum flexibility: wall-mountable, space-saving and without installation under the sink. Enjoy perfectly purified water at the touch of a button - thanks to powerful filtration, integrated UV sterilization and intelligent self-cleaning. Your benefits: Maximum water purity (removal of up to 99.9% of contaminants) Hot water in seconds - no kettle required Particularly efficient water consumption Intuitive operation via touch display Quick filter change without tools BEM Unicora 2.0 represents a new generation of water treatment: smart, efficient and well thought out down to the last detail. Technological advantages of the BEM Unicora 2.0: Vacation mode (automatic flushing every 48 hours): The system flushes the filters automatically. → Prevents standing water → Extends the service life of the membrane → Ensures consistently high water quality   Manual deep flushing: → Intensive system cleaning at the touch of a button → Ideal after filter change or longer service life   Efficient reverse osmosis system: Pure water : waste water = 1.2 : 1 → Less water loss → Lower operating costs → Higher efficiency compared to conventional RO systems   Filtration down to 0.0001 µm (100 GPD): Removes up to 99.9 % of bacteria, viruses, heavy metals and dissolved substances → Deep clean filtration without unnecessary additional stages   Antibacterial membrane technology: → Reduces the risk of microbial growth in the system → Increases hygienic safety   UV sterilization before dispensing water: Final treatment with UV light → Additional level of safety   6 temperature levels (heating up in approx. 3 seconds): 25° / 45° / 55° / 75° / 90° / 100°C → The desired temperature immediately - without waiting time   Individual quantity selection: 150 / 200 / 350 / 500 ml → Precise dosing without overflowing   Intelligent control system: → TDS display for water quality → Display of the remaining filter service life   Touch LED display: → Simple and intuitive operation   Child safety lock: → Prevents unintentional dispensing of hot water Filter & maintenance: PAC pre-filter: Removes sand, rust, particles and chlorine → Protects the RO membrane → Recommended change: 6-12 months   RO membrane 0.0001 µm (100 GPD): Main stage of water treatment → Removes up to 99.9 % of pollutants → Ensures consistently high water quality → Recommended change: 12-24 months   RO+C (available from May 2026): RO membrane + activated carbon post-filter → Improves the taste and balance of the water Quick filter change: 2 steps No tools required Change in just a few seconds Technical data - BEM Unicora 2.0: Membrane capacity: 100 GPD Max. Flow rate (pure water): up to 2.0 l/min Pure water : waste water: 1.2 : 1 Filtration: PAC + RO membrane 0.0001 µm (antibacterial) UV sterilization: integrated (before water is dispensed) Temperature levels: 25° / 45° / 55° / 75° / 90° / 100°C Volume selection: 150 / 200 / 350 / 500 ml Nominal power: 2100 W Heating power: 2050 W Noise level: ≤ 50 dB Inlet pressure: 0.1 - 0.4 MPa Inlet temperature: 5 - 38 °C Voltage: 220 V / 50 Hz Recommendation: To increase reliability and extend the system’s service life, we recommend installing a sediment pre-filter (M6 PP, Part No. 70200251) at the water inlet. The filter is installed between the faucet and the unit and traps mechanical contaminants such as sand, rust, and sediment, preventing them from entering the system. Regular use and timely replacement of the pre-filter: reduce the risk of clogging internal valves and connections reduce the strain on the pump and other components of the unit help prevent malfunctions in the system contribute to a more stable water supply reduce the likelihood of premature wear on internal components When properly maintained, this helps prevent typical problems associated with system contamination and ensures longer and more reliable use of the device. Order now and enjoy pure water at the touch of a button! Perfect for every home and workplace - our water purifier gives you access to clean and healthy water at all times. Please note: You can ordersuitable replacement filters for BEM Unicora right here: Replacement filter PAC or replacement filter RO Scope of delivery: After receiving and unpacking the product, you will find two main components. The first component is the water filter itself(RO and PAC filters included) The second component is an accessory set for installing the water filter, with the following components: 3-way ball valve 3/8" x 1/4" - For switching and shutting off the water supply for the filter system Angled plug-in connector 1/4" (90°) - Quick couplings for PE hose, for connecting inlet and outlet lines Wall mounting plate / wall bracket for water filter - Metal mounting plate for secure wall mounting of the filter system Fixing material for wall mounting - Dowels and screws for mounting the wall bracket PE water hose 1/4", food-safe (10 m) - Drinking water-safe polyethylene hose for supply and waste water Waste water pipe clamp / waste water clamp (complete) - For connecting the waste water hose to the drain pipe (incl. seal and screws) Hose safety clips for plug connectors (1/4") - Safety clips to secure the hose connections against unintentional loosening Drip tray for waste water and cover for the drip tray Operating instructions GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

BEM LINA - Reverse osmosis table water filter (RO) with UV water disinfection, hydrogen generator - optional mineralizer - New version BEM LINA table water filter for cooling and heating water, with 6-liter tank - Everything you want from water in one device BEM Lina is a new generation intelligent table water filter that combines depth filtration, heating, cooling and enrichment with molecular hydrogen. No water connection required - simply fill the tank with water and enjoy! Updated version of BEM LINA - what's new? Intelligent cleaning reminder - BEM LINA now automatically reminds you to clean the device in good time. The WASH button signals when cleaning is recommended - for hygienically fresh water at all times. New selection of water quantities - The preset quantities have been extended for even more convenience and suitability for everyday use: 150 / 200 / 250 ml as well as 300 / 400 / 500 ml - ideal for cups, glasses, bottles or carafes. Main advantages: 4-stage filter system: PAC filter - pre-filtration: removes chlorine, rust, odors and coarse particles. RO membrane (200G) - purifies water down to 0.0001 µm from bacteria, viruses, heavy metals, salts and other pollutants such as drug residues and pharmaceuticals CF filter (included) - removes residual odors and improves the taste of the water SR filter (optional) - enriches the water with 18 natural elements (Ca, Mg, K, etc.), 30-60 ppm UVC sterilization - integrated UV lamp eliminates up to 99.9% of bacteria before the water is dispensed and prevents germs from multiplying in the internal tank Healthy water with hydrogen: Enrichment through 4th generation SPE electrolysis technology - up to 1400 ppb of molecular hydrogen per sip. Molecular hydrogen is one of nature's most powerful antioxidants: Neutralizes free radicals Can improve metabolism, vascular function and general well-being Supports the reduction of inflammation and cell protection against ageing Comfort and safety technologies: Instant heating in 3 seconds - ideal for tea, coffee, baby food Cooling through semiconductor technology - refreshing water on hot days Six temperature settings - from ice cold to boiling Touch operation and HD display - modern, intuitive and stylish Child safety mode - protection against accidental hot water dispensing Automatic filter rinsing (Smart Wash) - extends service life and ensures hygiene Metered water dispensing - select at the touch of a button: cup, bottle, jug Filter status display - timely reminder for maintenance and replacement Easy to use: No installation - simply fill water into the 6-liter tank Quick filter change - no tools required, suitable for everyone Easy-to-clean water tank with hinged lid Separate tanks for clean and waste water - prevents backflow and increases the efficiency and service life of the filters Technical data: Flow rate: 520 ml/min Tanks: 6 L (input), 2.5 L (waste water), 3 L (clean water) Water temperature: 6 modes (from 10 °C to 100 °C) Heating capacity max. 18 liters of water/h (≥ 90°C) Maximum water flow rate 30 l/h Power: 2200 W Nominal heat output 2 100 W Nominal cooling capacity 68 W Voltage: 220 V Standby power consumption approx. 0.1 kW / 24 h (~4.2 W / h) Operating pressure 0.4 ~ 0.8 mPa Suitable water source: tap water Hydrogen content: up to approx. 1400 PPB Dimensions: 475 × 240 × 430 mm Weight: 10.2 kg Ideal for: Home and family Offices and meeting rooms Fitness and wellness areas Health-conscious people Why is BEM LINA the best choice? Operation without a water connection Highly effective filtration and mineral enrichment Produces highly concentrated hydrogen water Easy filter maintenance - service life 6-24 months depending on cartridge No more bottles, boilers or bulky under-sink systems BEM Lina is more than just a filter - it's your personal source of clean, tasty and healthy water - quickly, safely and effortlessly. Note: Suitable replacement filters for BEM LINA (1 filter set included): First purification stage - PAC (art. no. 70200599) Second purification stage -RO (Art. no. 70200598) Third cleaning stage - CF (Art. no. 70200602) or SR (art. 70200605 - not included in the scope of delivery) Set of 3 replacement filters (RO, PAC and CF) Art. 70200603 Important note: This device is only intended for domestic use or small offices. It is not intended for use in factories! To maintain the full warranty, only original filter elements may be used. Recommendation: To increase reliability and extend the system’s service life, we recommend installing a sediment pre-filter (M6 PP, Part No. 70200251) at the water inlet. The filter is installed between the faucet and the unit and traps mechanical contaminants such as sand, rust, and sediment, preventing them from entering the system. Regular use and timely replacement of the pre-filter: reduce the risk of clogging internal valves and connections reduce the strain on the pump and other components of the unit help prevent malfunctions in the system contribute to a more stable water supply reduce the likelihood of premature wear on internal components When properly maintained, this helps prevent typical problems associated with system contamination and ensures longer and more reliable use of the device. Scope of delivery: Water filter device (filter unit) – main unit of the water filter system Drip tray/drip tray – collection tray to protect against residual or condensation water escaping. Filter cartridge set: PAC/RO/CF without mineralisation External water tank for fresh and waste water – removable external container for collecting inlet and waste water (without fixed connection). Hose securing clips for plug connectors (1/4") – fixing clips to secure the hose connections against accidental loosening. Operating instructions GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

BEM IDA – everything you need from a water filter. And more. BEM IDA is an advanced water purification system featuring reverse osmosis, hydrogen enrichment, UV sterilization, and both heating and cooling functions. Connects directly to your tap – no need for manual refilling. Multistage Filtration: PAC filter – removes chlorine, rust, odors, and visible particles RO membrane (200G) – blocks bacteria, viruses, heavy metals, salts, and other contaminants such as medication residues and pharmaceutical substances (filters down to 0.0001 µm) CF filter (included) – eliminates residual odors and enhances water taste SR filter (optional) – enriches water with 18 natural minerals (e.g., Ca, Mg, K), 30–60 ppm UV sterilization – kills up to 99.9% of bacteria before water is dispensed Hydrogen Enrichment: Electrolysis system infuses water with molecular hydrogen (up to 1400 ppb) – one of the highest levels in its class. Supports metabolism, cell regeneration, and antioxidant protection. Temperature Control & Water Dispensing: Choose the exact temperature from cool to boiling – tailored to your habits Select the volume – for a small cup, large mug, or continuous flow Instant heating – in just 3 seconds Semiconductor cooling – great for hot weather Convenience & Safety: Touch control panel + HD display Child lock Automatic filter rinsing (Smart Wash) Filter status indicator Technical Specifications: Type: Countertop filter with hot & cold water Capacity: 200G (0.5 L/min) Built-in tank: 4 liters Temperature range: 10 °C to 100 °C (6 levels) Heating: fast, 3 seconds Cooling: semiconductor system Power: 220V / 50Hz Dimensions: ~42 × 25 × 45 cm Weight: 10 kg Why choose BEM IDA? Filtration + hydrogen + temperature – all in one device Direct water connection – no tanks, no refilling No boiling, no bottles, no bulky systems Easy filter replacement Perfect for kitchen, office, or studio Note: Suitable replacement filters for BEM IDA (1 filter set is included in the order): First cleaning stage - PAC (Art. No. 70200599) Second cleaning stage - RO (Art.-No. 70200598) Third cleaning stage - CF (Art.-No. 70200602) or optional SR mineral filter (Item no. 70200605 – not included)​ 3-SET replacement filters complete (RO, PAC and CF) Art.-No. 70200603 Important notes: This unit is designed for household use only. Not intended for use in businesses! To ensure optimum water treatment, only original filter elements may be used! Recommendation: To increase reliability and extend the system’s service life, we recommend installing a sediment pre-filter (M6 PP, Part No. 70200251) at the water inlet. The filter is installed between the faucet and the unit and traps mechanical contaminants such as sand, rust, and sediment, preventing them from entering the system. Regular use and timely replacement of the pre-filter: reduce the risk of clogging internal valves and connections reduce the strain on the pump and other components of the unit help prevent malfunctions in the system contribute to a more stable water supply reduce the likelihood of premature wear on internal components When properly maintained, this helps prevent typical problems associated with system contamination and ensures longer and more reliable use of the device. Scope of delivery: After receiving and unpacking the product, you will find two main components. The first component is the water filter itself (including PAC, RO and CF filters without mineraliser). The second component is an accessory set for installing the water filter, with the following components: 3-way ball valve 3/8‘ x 1/4’ – For connecting the filter to the drinking water pipe and for shutting off the water supply. PE water hose 1/4", food-safe (5 m) – Polyethylene hose for drinking water and waste water connections. Spare blind plug incl. retaining clip for refrigerator connection – Blind plug with retaining clip for closing unused connections. Hose retaining clips for plug connectors (1/4") – Retaining clips to secure the hose connections against accidental loosening. Drip tray / drip tray – Collection tray to protect against escaping condensation or residual water. Waste water pipe clamp / waste water clamp (complete) – For attaching the waste water hose to the drain pipe. Operating instructions GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

B-Ware BEM IDA – everything you need from a water filter. And more. BEM IDA is an advanced water purification system featuring reverse osmosis, hydrogen enrichment, UV sterilization, and both heating and cooling functions. ATTENTION: B-GRADE PRODUCT! This refers, for example, to demonstration units used during studio recordings, returned items, display pieces, or products with damaged packaging. B-grade means: the devices are 100% functional but may have minor cosmetic imperfections. Technically, they are in perfect condition and have been carefully inspected. The warranty period for this product is 1 year. Attention! The filter may arrive with traces of water, as it is tested for functionality before shipping. Connects directly to your tap – no need for manual refilling. Multistage Filtration: PAC filter – removes chlorine, rust, odors, and visible particles RO membrane (200G) – blocks bacteria, viruses, heavy metals, salts, and other contaminants such as medication residues and pharmaceutical substances (filters down to 0.0001 µm) CF filter (included) – eliminates residual odors and enhances water taste SR filter (optional) – enriches water with 18 natural minerals (e.g., Ca, Mg, K), 30–60 ppm UV sterilization – kills up to 99.9% of bacteria before water is dispensed Hydrogen Enrichment: Electrolysis system infuses water with molecular hydrogen (up to 1400 ppb) – one of the highest levels in its class. Supports metabolism, cell regeneration, and antioxidant protection. Temperature Control & Water Dispensing: Choose the exact temperature from cool to boiling – tailored to your habits Select the volume – for a small cup, large mug, or continuous flow Instant heating – in just 3 seconds Semiconductor cooling – great for hot weather Convenience & Safety: Touch control panel + HD display Child lock Automatic filter rinsing (Smart Wash) Filter status indicator Technical Specifications: Type: Countertop filter with hot & cold water Capacity: 200G (0.5 L/min) Built-in tank: 4 liters Temperature range: 10 °C to 100 °C (6 levels) Heating: fast, 3 seconds Cooling: semiconductor system Power: 220V / 50Hz Dimensions: ~42 × 25 × 45 cm Weight: 10 kg Why choose BEM IDA? Filtration + hydrogen + temperature – all in one device Direct water connection – no tanks, no refilling No boiling, no bottles, no bulky systems Easy filter replacement Perfect for kitchen, office, or studio Note: Suitable replacement filters for BEM IDA (1 filter set is included in the order): First cleaning stage - PAC (Art. No. 70200599) Second cleaning stage - RO (Art.-No. 70200598) Third cleaning stage - CF (Art.-No. 70200602) or optional SR mineral filter (Item no. 70200605 – not included)​ 3-SET replacement filters complete (RO, PAC and CF) Art.-No. 70200603 Important notes: This unit is designed for household use only. Not intended for use in businesses! To ensure optimum water treatment, only original filter elements may be used! GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

BEM Akira water purifier with 5-stage filter system, without water tank - every drop of water is fresh! Replace three conventional PP+C+PP filters with just one PAC filter system with the new RO membrane technology! As a result, the service life of the system can be extended by a factor of 2! Compared to conventional devices with a water tank, the size is more compact and saves space under the sink!  Features: Long service life Low waste water content User-friendly DIY design, three indicators, two steps to change the filter With the new RO membrane technology, Less concentrated water, higher flow rate 1 L/min Recovery rate 1.5:1 Three filters with different indicators Easy filter change at the front without moving the unit Top handle to pull the unit out of the cabinet Compact: 165 mm wide, slim design, saves space under your sink No water tank available - filtered water directly from the tap General information: Power supply voltage and frequency (V/Hz) - 220V 50Hz Power consumption - 65W Treatment capacity (L/h) - 60L/h & 90L/h Pure water flow rate: 1 liter/minute Rated life: 2,000 liters (NOTE: The life of the filter depends on the duration of use and the quality of the water supply) Filtration principle: Reverse osmosis Does it require a power supply: Yes Descaling: No Disinfection function: not supported Cooling function: not supported Heating function: not supported Installation method: under the kitchen counter Filter & service life / Applicable range: Pouvoir Hydrogène: PH 6.5～8.5 Applicable environmental conditions: 4～38℃ Applicable water pressure range: 0.1～0.4 MPa Feed water temperature: 5～45℃ Applicable feed water - GB5749-2006 city water Purification performance: Particularly removable - 0.001～0.0001μm Odor/taste - NA Visible object - NA Chlorine reduction ≥90% Large intestine bacillus ≥99.99% Filter information: First stage filter and service life - PAC 3600L (1 year) Second-stage filter and service life - RO 7200L (2 years) Third stage filter and service life - C 3600L (1 year) Lead, viruses and so on / Material: Top cover materials (ABS/PP/HIPS) - ABS Front panel materials (ABS/PP/HIPS) - ABS Side panel materials (ABS/PP/HIPS/metal) - ABS Product information: Product dimensions: 33.5 x 16.5 x 36.5 cm Net weight: 7.5 kg Color: White Recommendation: To increase reliability and extend the system’s service life, we recommend installing a sediment pre-filter (M6 PP, Part No. 70200251) at the water inlet. The filter is installed between the faucet and the unit and traps mechanical contaminants such as sand, rust, and sediment, preventing them from entering the system. Regular use and timely replacement of the pre-filter: reduce the risk of clogging internal valves and connections reduce the strain on the pump and other components of the unit help prevent malfunctions in the system contribute to a more stable water supply reduce the likelihood of premature wear on internal components When properly maintained, this helps prevent typical problems associated with system contamination and ensures longer and more reliable use of the device. SCOPE OF DELIVERY: After receiving and unpacking the product, you will find two main components. The first component is the water filter itself (water tap incl). The second component is an accessory set for installing the water filter, with the following components: 3-Way Ball Valve 3/8" x 1/4" – For connecting the filter to the water supply and controlling water flow. PTFE Sealing Tape – For sealing threaded connections. Food-Grade PE Tubing 1/4" (5 m) – Polyethylene tubing for water supply and drain connections. Inline Pressure Regulator – Reduces and stabilizes incoming water pressure before the filter. Drain Saddle Clamp Assembly – For connecting the wastewater line to the drain pipe. Operating instructions GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

BEM Robin All-in-One compact reverse osmosis water filter system for the kitchen, drinking water filter Technical data: Filter size (W/D/H): 136 mm / 250 mm / 354 mm Can size (W/H): 136 mm / 245 mm Total height: 355 mm Stand holder: 172 mm Weight: 7.2 kg Filter cartridge: Recommended replacement between 12 and 24 months (depending on the quality of your water) Features: Polypropylene fibers (sediment filter) Granulate activated carbon filter Activated carbon blocker Activated carbon afterfilter Membrane filter (RO reverse osmosis) Filtration capacity: 0.26 liters/min. Water storage cup: 2.5 liters Mains voltage: 100-240 V - 50/60 Hz Rated power: 30 watts BPA - Free Mains cable length: approx. 2 meters Connecting hose: approx. 3.20 meters Connecting hose between the main body and water jug: approx. 2.10 meters Scope of delivery: BEM Robin 5-in-1 water filter system Table-top station for the water jug 2.5 L water jug power supply unit Connecting hoses BEM AQUA filter cartridge (already installed) Operating instructions (German & English) Universal waste water drain pipe clamp 1/4 inch clamp for osmosis systems and water filters T-piece cold water connection with shut-off valve: 3/8 inch to 1/4 inch hose for reverse osmosis system The advantages of our BEM Robin water filter system: No more lugging around heavy crates (either at the touch of a button or fully automatically, you have fresh and clean water) You save money Sleek and modern design The water filter system is user-friendly and easy to operate for all age groups The water filter system is installed in just a few steps Hardly audible, as the appliance is completely silent Thanks to automatic detection, filtration stops as soon as the water reservoir has reached its maximum capacity The Robin water filter stands for maximum convenience Experience a product with which you are always on the safe side. The innovative filtration system provides you with fresh and really clean water. The integrated night-saving mode also saves you energy costs. You will be really surprised at the difference between tap water and water filtered by the BEM AQUA water filter. We have spared no expense or effort to give you access to clean water. The result is a device that allows you to go through life safely without endangering your own health with contaminated water. BEM Robin - a small filter system with a big impact one of the smallest and most effective devices on the market fast and effective drinking water preparation innovative membrane filtration simple and practical filter change simple 1-button operation aqua-stop system controlled by the sensor high-quality materials and modern design easy installation Suitable replacement filter: Item no.: 70200245 Replacement filter 5 in 1 for BEM Robin and BEM Lora RO water filter We recommend the installation of a pre-filter / sediment filter against coarse dirt: Art. No. 70200251 Properties: Polypropylene fibers (sediment filter) Granulate activated carbon filter Activated carbon blocker Activated carbon afterfilter Membrane filter (RO reverse osmosis) Important note: This appliance has only been developed for use in households. Not intended for use in businesses! Scope of delivery: BEM Robin 5-in-1 water filter system Tabletop station for the water jug Carafe for filtered water, 2.5 l 1 x 5-in-1 filter cartridge for BEM Robin (already installed!) Connecting hoses/water hoses, 1/4" inch (3 m) Universal waste water drain pipe clamp 1/4 inch clamp for osmosis systems and water filters T-piece cold water connection with shut-off valve: 3/8 inch to 1/4 inch hose for reverse osmosis system  Decorative feed-through bushing for worktop (hose feed-through) – cover for the hose feed-through through the worktop. Extension adapter for worktop feed-through – thread extension for adaptation to different worktop thicknesses. Power supply unit Operating instructions GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

BEM Tornado hydrogen can Oxygen and hydrogen generator for drinking water that structures and mineralizes water (1500 ml) Tornado - Hydrogen water generator that structures and mineralizes water Tornado is a new generation multifunctional device that structures, mineralizes and enriches water with hydrogen. This improves the biological activity of the water and optimizes its health-promoting properties. The combination of electrolysis, vortex hydrodynamics and magnetization gives the water properties similar to natural springs - it becomes pure, lively and easily digestible. Health benefits of water treated with Tornado: 1. powerful antioxidant effect: Hydrogen is one of the most effective natural antioxidants. It neutralizes free radicals (reactive oxygen) responsible for: Aging, Inflammation, DNA damage, chronic diseases (cancer, diabetes, heart disease, Alzheimer's, etc.). 2. detoxification and cell regeneration - Thanks to the fine cluster structure, the water easily penetrates the cells and improves tissue moisturization, the elimination of toxins, the function of the intestines and liver, the metabolism. 3. supports the immune system and energy production: Reduces oxidative stress. Increases ATP production in the mitochondria. Strengthens resistance to viruses, bacteria and stress. 4. mineralization - a special filter enriches the water with essential trace elements: Magnesium (Mg²⁺) - for muscles and nervous system, Calcium (Ca²⁺) - for bones and teeth, Silicon (SiO₂) - for skin and connective tissue, Sodium (Na⁺) - for the water-salt balance. 5. structuring of the water: The eddy current breaks up large molecular clusters and creates micro-structured water. This improves the bioavailability of water and the substances dissolved in it. The effect is similar to natural processes in springs, waterfalls and rivers. 6. LED lighting with color therapy: The Tornado generator is equipped with LED lighting that produces different colors to support relaxation, energy or concentration. Water usage recommendations: Use purified non-carbonated drinking water - filtered or bottled water. The followingare not suitable: carbonated, highly mineralized or contaminated water. Why Tornado is the smart choice: Combines science, technology and healthcare in one device Ideal for everyday use at home, in the office or in the kitchen Noticeable improvement in water quality - you won't just taste it, you'll feel it too! Technical details: Applicable water quality: Purified drinking water (e.g. filtered) Please do not use carbonated water (sparkling water, sparkling water, mineral water)! Suitable water temperature: 5 - 40°C Suitable ambient temperature: 5 - 45°C Hydrogen content: 800 - 1200 PPB Duration of electrolysis process, hydrogen water: H2 - 8 min (approx. 800 PPB) / H2+ -13 min (approx. 1200 PPB) Duration of water magnetization: O2 Oxygen water - 10 min Duration of self-cleaning function - 1 min Different modes: Hydrogen generation, magnetization, self-cleaning function Electrode: Titanium platinum Color: White / Transparent Capacity: 1500 ml Size: 210 x 182 x 336 mm Net weight: 1600 g Voltage: 24 V Power: 12 W Material: PC in food quality, free from BPA Note: Matching replacement filter included: Art. 70200796 (recommended replacement interval is approx. 3 - 4 months, depending on use and quality of water used). This is a BPA-free Maifan stone, calcium sulphite filter, filled with calcium sulphite balls (CaSO3 balls), which removes 99.9 % of the chlorine from the prepared water and slightly mineralizes the water. Environmentally friendly, no secondary pollution, no heavy metal overload. Slightly alkaline, the pH value can remain stable between 7.0 and 8.5, keeping the water slightly alkaline. Contains a rich spectrum of trace elements, including K, Na, Ca, Mg and other trace elements. Scope of delivery: 1 x BEM Tornado hydrogen can oxygen and hydrogen purifier for drinking water 1 x power cable incl. 24 V power supply unit 1 x operating instructions GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Set of 3 replacement filters (RO+PAC+SR) for BEM LINA and IDA water filters Complete set of three filter elements for multi-stage water treatment: pre-filtration, deep cleaning and final taste improvement. 1st stage - PAC (pre-filter): Combined filter made of polypropylene/cotton and activated carbon. Removes / reduces: Sand, rust and deposits mechanical and suspended particles residual chlorine Unpleasant odors and flavors Change interval: 6-12 months (depending on the quality of the tap water, e.g. water hardness) 2nd stage - RO (reverse osmosis): Membrane filter for deep water purification. Enables filtration at molecular level. Filtration fineness: up to 0.0001 µm Removes / reduces: dissolved substances (TDS) Hardness salts heavy metals Organic and inorganic impurities Change interval: up to 12 months (depending on the quality of the tap water, e.g. water hardness) 3rd stage - SR (remineralization): Post-filter with remineralization function. Improves the taste of the water and enriches it with important minerals. Enriches the water with: Calcium magnesium potassium sodium Additionally: improves the taste Stabilizes the water composition Change interval: 6-12 months (depending on the quality of the tap water, e.g. water hardness)Important! The service life of the filter depends on the quality of the source water and the intensity of use. More frequent replacement may be necessary if the load is higher. Failure to replace the filter in good time can impair its performance and cause damage to the membrane. Use with hot water (>38°C) is not permitted as this can damage the structure of the membrane and the activated carbon. Recommendations for filter replacement according to TDS value: TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (SR) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Set of 3 replacement filters (RO+PAC+CF) for BEM LINA and IDA water filters Complete set of three filter elements for multi-stage water treatment: pre-filtration, deep cleaning and final taste improvement. 1st stage - PAC (pre-filter): Combined filter made of polypropylene/cotton and activated carbon. Removes / reduces: Sand, rust and deposits mechanical and suspended particles residual chlorine Unpleasant odors and flavors Change interval: 6-12 months (depending on the quality of the tap water, e.g. water hardness) 2nd stage - RO (reverse osmosis): Membrane filter for deep water purification. Enables filtration at molecular level. Filtration fineness: up to 0.0001 µm Removes / reduces: dissolved substances (TDS) Hardness salts heavy metals Organic and inorganic impurities Replacement interval: up to 12 months (depending on the quality of the tap water, e.g. water hardness) 3rd stage - CF (secondary filter): Activated carbon filter for final water treatment: improves taste and odor removes residual substances remaining after the membrane Replacement interval: 6-12 months (depending on the quality of the tap water, e.g. water hardness)Important! The service life of the filter depends on the quality of the source water and the intensity of use. More frequent replacement may be necessary if the load is higher. Failure to replace the filter in good time can impair its performance and cause damage to the membrane. Use with hot water (>38°C) is not permitted as this can damage the structure of the membrane and the activated carbon. Recommendations for filter replacement according to TDS value: TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (CF) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

BEM 3-way tap - modern design meets 18/10 stainless steel quality The BEM 3-way kitchen tap combines modern design with high-quality stainless steel (18/10) and allows hot, cold and filtered water to be dispensed via a single tap - thanks to separate pipes without mixing. All water-bearing components are suitable for drinking water and KTW-tested. This BEM 3-way faucet is compatible with our under-sink filtration systems, such as Orion (Art. 600) or Akira (Art. 592), and can be used with them without any issues.​ Your benefits at a glance: 3 functions in one: hot water, cold water and filtered water from just one tap Separate outlets: no mixing of tap and filter water 18/10 stainless steel (AISI 304): robust, hygienic and corrosion-resistant Durable ceramic cartridge (KTW-tested) for hot and cold water Elegant design that blends harmoniously into any modern kitchen Technical data: Body material: Solid 18/10 stainless steel Spout: Precisely manufactured cast spout made of 18/10 stainless steel Handles: 18/10 stainless steel Cartridge (hot/cold): Ceramic, KTW-tested Cartridge (filtered water): Brass valve Hoses: 18/10 stainless steel, 60 cm long, 3/8" union nut Pipe for filtered water: 18/10 stainless steel Surface: Matt brushed stainless steel Total height: 350 mm Spout height: 320 mm Spout length: 270 mm Body diameter: 50 mm Handle length right: 100 mm Handle length left: 60 mm GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Complex replacement filter (all-in-one) for the BEM Robin / BEM Lora RO filter system Multi-stage cartridge that combines all water purification stages in one housing. Consists of a multi-layer filter system: Polypropylene sediment layer granulated activated carbon carbon block (carbon block) reverse osmosis membrane Final carbon post-filter Ensures complete water purification: Removes mechanical impurities: Sand, rust, suspended solids Reduces the content of chlorine and its compounds Eliminates unpleasant odors and flavors in the water Retains organic compounds and decomposition products Protects the membrane from premature fouling and wear Ensures deep purification through reverse osmosis (up to 99% of dissolved substances) Removes hardness salts, heavy metals and dissolved impurities (TDS) Reduces the total content of dissolved substances (ppm) in the water Ensures a stable quality of the purified water Improves the taste of the water in the final filtration stage Replacement interval: Recommendation to replace the filter element every 12-24 months (depending on the quality of the tap water and the intensity of use)Important! The service life of the cartridge depends on the quality of the source water and the consumption volume. As the cartridge combines several purification stages, its wear affects all filtration stages simultaneously. Delayed replacement can lead to a deterioration in water quality and a reduction in appliance performance. It is forbidden to use the filter with hot water (>38°C) as this destroys the structure of the membrane and the activated carbon. Recommendations for filter replacement according to TDS value: TDS value (ppm) Water quality Service life 0-150 Soft 24 months 150-300 medium hard 18-24 months 300-500 hard 12-18 months 500+ very hard 6-12 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Reverse osmosis membrane (RO) for the BEM Orion water filter Central filter element of the system for the deep treatment of tap water and to ensure consistently high drinking water quality. Functions and benefits: Significantly reduces the content of dissolved substances (TDS) Reduces the concentration of heavy metals (including lead) Reduces hardness constituents (salts) in the water Removes unwanted dissolved compounds Ensures stable and consistent water quality Filtration technology: The filter is based on reverse osmosis technology: Water is forced under pressure through a semi-permeable membrane, effectively separating purified water from dissolved substances and impurities. Performance and service life: Recommended replacement: every 12-24 months Under optimum operating conditions: up to 36 months ! The actual service life depends on the quality of the tap water, the mineral content, the pressure and the intensity of use. With an average degree of mineralization of the tap water (approx. 250-300 ppm), it is recommended to adhere to the usual replacement intervals. Instructions for use: Before first use, the filter should be rinsed according to the instructions. Timely replacement is necessary to ensure filter performance and constant water quality. Filter change: The filter can be changed without tools and requires no special expertise. Recommended: Shut off the water supply Depressurize the system Disconnect the appliance from the power supply Replace the filter After installation, the system should be flushed until the water quality has stabilized. Recommendations for filter replacement according to TDS value: TDS value (ppm) Water quality 1st stage (PCB) 2-3rd stage (RO) 0-150 Soft 12 months 24-36 months 150-300 medium hard 8-10 months 12-24 months 300-500 hard 6-8 months 12-18 months 500+ very hard 3-6 months 8-12 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. Important notes: The filter must not be removed during operation. Failure to observe the recommendations may result in reduced filter performance or malfunctions. Damage caused by improper use or failure to observe the operating conditions may be excluded from the warranty. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Main board with heating element for BEM LINA / IDA / LUNA Compatibility: Suitable for models BEM LINA/IDA (art. no. 597/596) and BEM LUNA (art. no. 599) The main circuit board with integrated heating element is the central control module of the appliance. It regulates the heating function and coordinates all electronic processes to ensure stable and efficient operation. Note: Unauthorized disassembly or repair of the appliance voids the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

BEM LUNA set of 3 replacement filters (RO, PAC and CF) for BEM Luna water filter system 1. replacement filter for BEM Luna PAC water filter Features: Foldable combined polypropylene/cotton rod with activated carbon Removal of impurities such as sludge, rust, sand, suspended solids Removal of residual chlorine and absorption of unpleasant tastes and odors Replacement interval: Recommended filter cartridge replacement after 6 to 12 months (depending on the quality of the tap water, e.g. water hardness)2. replacement filter for BEM Luna CF water filter Features: Composite carbon rod serves to improve the taste, enrichment with valuable minerals! Replacement interval: Recommended filter cartridge change after 6 to 12 months (depending on the quality of the tap water, e.g. water hardness)3. replacement filter for BEM Luna RO water filter Features: Reverse osmosis filter element. Filtration fineness: 0.0001 micrometers Removal of deposits and heavy metals Replacement interval: Possible filter cartridge replacement after 12 to 24 months (depending on the quality of the tap water, e.g. water hardness)

Replacement filter 5-in-1 for the BEM Lisa water filter system model Universal replacement block for complete deep water purification. This high-tech cartridge replaces a complete filter system and combines five stages of water treatment in one ergonomic housing. The integrated reverse osmosis technology ensures the removal of impurities at molecular level. 5 stages of protection in one filter: Polypropylene fiber: removes coarse particles (sand, rust, sludge and other suspended solids). Granulated activated carbon: Effectively absorbs chlorine and organic impurities and protects the membrane. Carbon block: Fine cleaning of residual chlorine, pesticides and herbicides. Reverse osmosis membrane: The key process. Removes up to 99% of dissolved substances: limescale (hardness salts), heavy metals, bacteria and viruses. Post-filter with activated carbon: Final improvement of taste and odor for crystal-clear water freshness. Operating temperature: 4-38°C (only use for cold water) Replacement interval: Possible replacement of the filter cartridge every 12-24 months (depending on the water quality) Important: After installing a new cartridge, the water must run through the system for 5-10 minutes (according to the appliance instructions). This is necessary to remove natural carbon dust and activate the membrane layer. The service life of the cartridge depends on the quality of the initial water and the consumption volume. As the cartridge combines several cleaning stages, its wear affects all filtration stages simultaneously. Delayed replacement can lead to a deterioration in water quality and a reduction in appliance performance. It is forbidden to use the filter with hot water (>38°C) as this destroys the structure of the membrane and the activated carbon. Recommendations for filter replacement according to TDS value: TDS value (ppm) Water quality Service life 0-150 Soft 24 months 150-300 medium hard 18-24 months 300-500 hard 12-18 months 500+ very hard 6-12 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: BEM GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Reverse osmosis replacement filter RO for BEM Akira Membrane cartridge for reverse osmosis for deep water purification. Is the main filtration element in the system and ensures fine purification at molecular level. Degree of filtration: up to 0.0001 μm Capacity: up to 1.5 l/min (≈ up to 378 l/day) Reduces the total dissolved solids content (ppm) and contributes to a more stable quality of drinking water Removes / reduces the content of: up to 99 % of dissolved substances (TDS, depending on the quality of the source water) Hardness salts heavy metals Bacteria and viruses (effectiveness depends on operating conditions) Organic and inorganic impurities Size: Ø ~109 mm x 286 mm Operating temperature: 4-38°C Operating pressure: 0.4-0.8 MPa Replacement interval: Replace the filter cartridge every 12-24 months(depending on the water quality) Indications for replacement: Increase in the TDS value in the purified water Deterioration in the taste of the water Reduction in system performance Exceeding the recommended service life Important! The service life of the membrane depends on the quality of the source water and the condition of the pre-filter. Delayed replacement can lead to a reduction in filtration efficiency and a deterioration in drinking water quality. The use of filters with hot water (>38°C) is prohibited, as this destroys the structure of the membrane and the activated carbon. Recommendations for filter replacement according to TDS value TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (C2) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Hydrogen module for BEM Tornado Diameter: 7.6 cm Compatibility: Suitable for model BEM Tornado (item no. 70200787) The hydrogen generator plate is used to replace worn or damaged components. It ensures stable operation of the system and efficient hydrogen generation. Note: Unauthorized disassembly or repair of the device will void the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Main pump for BEM LINA / IDA Compatibility: Suitable for models BEM LINA (art. no. 597) and BEM IDA (art. no. 596) The main pump (boost pump) is a central component of the appliance. It provides the necessary water pressure in the system and ensures even circulation as well as stable and efficient performance during operation. Technical data Voltage: 24 V Operating pressure: 70 PSI Flow rate: ≥ 1000 ml/min Operating current: ≤ 1.5 A Operating temperature: 5 °C - 45 °C Note: Independent disassembly or repair of the device voids the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

RO replacement filter for BEM Lina and BEM Ida water filters - second purification stage Features: Main element of reverse osmosis filtration. Ensures deep purification of the water at molecular level. The membrane with a pore size of 0.0001 μm retains up to 99 % of dissolved substances. Removes hardness salts, heavy metals, bacteria, impurities and dissolved substances (TDS). Replacement interval: Replace the filter cartridge every 12-24 months (depending on the water quality) Important! The service life of the cartridges depends on the quality of the source water and the volume used. Delayed replacement of the pre-filter (1st stage, PAC) can impair the function of the reverse osmosis membrane (RO). Ignoring the membrane change can lead to impurities entering the drinking water and to a reduction in the efficiency and functionality of the appliance. Recommendations for filter change according to TDS value:         TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (CF/SR) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

PAC replacement filter for BEM Lina and BEM Ida water filters - First cleaning stage Features: Foldable combined polypropylene/cotton cartridge with activated carbon Removal of impurities such as sediment, rust, sand, suspended particles Reduces chlorine content, eliminates odors and foreign tastes. Replacement interval: Replace the filter cartridge every 6-12 months (depending on the water quality)Important! The service life depends on the quality of the tap water and the consumption volume. Delayed replacement can lead to a reduction in the efficiency of the entire system and damage to the membrane. The use of filters with hot water (>38°C) is prohibited, as this destroys the structure of the membrane and the activated carbon Recommendations for filter replacement according to TDS value: TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (CF/SR) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Replacement filter for BEM Unicora water filter - SINGLE (RO) Filter size: Ø 66.5 x 272mm Properties: Removes up to 99.9% of bacteria, heavy metals, viruses and dissolved substances Filter grade: 0.0001 micron Flow rate: 100 GPD (gallons per day) Replacement range - tap water Operating temperature 5-38°C Service life 12-24 months (depending on water quality and consumption) GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Old hydrogen module for BEM LINA / IDA Compatibility: Suitable for older models BEM LINA (art. no. 597) and BEM IDA (art. no. 596) The hydrogen module is intended for earlier versions of the devices and is used to generate hydrogen in the system. It ensures stable performance and supports the proper functioning of the appliance. Note: Independent disassembly or repair of the appliance will invalidate the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Main pump for BEM LUNA Compatibility: Suitable for model BEM LUNA (item no. 599) The main pump (boost pump) is a central component of the appliance and ensures the required water pressure in the system. It ensures stable circulation and optimum performance during operation. Technical data Voltage: 24 V Operating pressure: 70 PSI Flow rate: ≥ 550 ml/min Operating temperature: 5 °C - 45 °C Operating current: 1.0 A - 1.3 A Note: Independent disassembly or repair of the device will invalidate the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de